Overall
Summary
The Titan Fitness Landmine Stand is a great addition to your garage gym if you require a rackable solution for your landmine movements. We use it to avoid injury and for quick setup between different landmine-based exercises.
Pros
- Easy to place a barbell.
- Weight racking is faster and safety.
- Doesn’t take up a lot of room.
- Dual rollers ensure your barbell stays safely in place.
Cons
- The cost seems a bit steep.
- At higher height settings the barbell stand becomes a little bit wobbly.
Quick answer: The Titan Fitness Landmine Stand is a steel barbell rest that holds the loaded end of a landmine bar at four heights between 26.5″ and 35.5″, so you can start landmine presses, Viking presses and hack squats without lifting the bar off the floor first. It sells for $169.97 at Titan Fitness (list price $219.99, checked October 2026).
- Load rating: 440 lb on a nylon roller barbell rest
- Footprint and weight: 18.25″ x 24″, 35 lb
- Warranty: 1 year from Titan Fitness
- Best for: anyone who does a lot of landmine work and is tired of deadlifting the bar into position
- Watch out for: some wobble on the top setting, which the weight storage version helps with
We’re a little bit shocked that the Titan Fitness Landmine Stand is not a more common product among garage gym accessories. If you’ve ever lifted your barbell up to perform Viking presses and other standing maneuvers, you know what a pain it can be to take heavy weights from the ground to your starting position.
The Titan Fitness Landmine Stand solves this problem by creating a “rackable” starting point that is adjustable to four different heights (26.5″, 29.5″, 32.5″, 35.5″). Titan’s current listing rounds that range to 27″ to 35″, and the nylon roller is rated for up to 440 pounds.
We really like that the stand features two rollers that bend in slightly, allowing the bar to easily catch. However, the top height for the stand is a bit wobbly. Titan could improve upon the landmine stand by adding better steel for the adjustable part of the stand. The wobbling can be partially fixed if you purchase the plate-loaded option that added stability with just a few Olympic plates thrown on each side of the stand.
While not a perfect stand, it does the job well enough and for the cost, it’s a must-have option for anyone who loves landmine exercises. It also doesn’t take up much room at 18.25″ x 24″ and a weight of just 35 pounds.
The landmine stand also features stable wheels and a handle that make it easy to roll around the gym, although at 35 pounds, I tend to just pick up the stand and move it as needed.
You can check out the Titan Fitness Landmine stand here.
Titan Fitness Landmine Stand specs
Here’s how the standard stand compares with the plate-loaded version, straight from Titan’s spec sheets.
| Spec | Landmine Stand | Landmine Stand With Weight Storage |
|---|---|---|
| Height settings | 4 (26.5″ to 35.5″) | 4 (26.5″ to 35.5″) |
| Footprint | 18.25″ x 24″ | 18.25″ x 24″ |
| Roller width | 11.5″ nylon | 11.5″ nylon |
| Load rating | 440 lb | 440 lb |
| Stand weight | 35 lb | 46 lb |
| Plate storage | None | Two 8″ sleeves for Olympic plates (47 mm) |
| Build | Bolt-together steel, black powder coat | Bolt-together steel, black powder coat |
| Warranty | 1 year | 1 year |
| Price (October 2026) | $169.97 (list $219.99) | $219.97 (list $314.99) |
The extra 11 pounds on the weight storage version comes from the two plate sleeves, and that’s where the added stability comes from once you load them. Owners on Reviews.io rate that version 4.6 out of 5 from 29 reviews, with one noting that “the weight storage provides the stability necessary.”
How high does the Titan Fitness Landmine Stand go?
The short version: the lowest setting puts the loaded end of the bar 17.6″ higher than it sits on standard 450 mm plates on the floor, and the top setting adds 26.6″. That’s the distance you no longer have to pull the bar up before every set.

Titan Fitness Landmine Stand price
Prices on Titan gear move around a lot, so we checked the stand at Titan and on eBay. Toggle the chart below to see today’s price against list price, or switch to the table.
Garage Gym Products · Data
Titan landmine stand price check
Titan’s own store is the cheapest place to buy the stand new right now at $169.97, $25.50 less than eBay. Scratch and dent saves another $37.99 but drops returns and warranty claims, and the weight storage version costs $50.00 more.
| Where | Price | List | Note |
|---|---|---|---|
| Titan Fitness, new | $169.97 | $219.99 | 1-year warranty, free shipping |
| eBay (Titan Brands store), new | $195.47 | n/a | 30-day returns |
| Titan Fitness, scratch and dent | $131.98 | $219.99 | No returns or warranty claims |
| Titan Fitness, with weight storage | $219.97 | $314.99 | Adds two 8″ plate sleeves, 46 lb |
Source: Titan Fitness, Titan scratch and dent, Titan weight storage version, eBay
As of October 2026 · garagegymproducts.com
The scratch and dent version is the cheapest way in, but Titan says those units may have cosmetic damage or missing hardware and aren’t eligible for returns or warranty claims. For most people, the regular stand at Titan is the safer buy.
What else you need for landmine training
The stand only holds the loaded end of the bar. The other end still needs a pivot, whether that’s a rack-mounted unit like the Rogue Monster Landmine 2.0 or a freestanding landmine base. If you want a better grip for presses and rows, a set of parallel landmine handles slides right onto the sleeve.
You’ll also want collars to keep plates in place when you rest the bar on the rollers. Simple spring clips do the job fine.
Pros and cons
If you’re still kitting out your space, our list of home gym essentials covers the bigger pieces first. For landmine fans, here’s how the stand stacks up.
- Pro: Saves you from lifting the bar off the floor before every landmine set
- Pro: Angled rollers make it easy to catch the bar
- Pro: Small 18.25″ x 24″ footprint and only 35 pounds
- Pro: 440-pound load rating covers almost any landmine lift
- Con: The top height setting has some wobble
- Con: Plate storage, which adds stability, costs about $50 more
Titan Fitness Landmine Stand FAQ
What is a landmine stand used for?
A landmine stand holds the loaded end of a landmine barbell off the floor, giving you a rackable starting and finishing point. That means less bending and lifting between sets of landmine presses, Viking presses, hack squats and similar moves.
What heights does the Titan Fitness Landmine Stand adjust to?
It has four settings: 26.5″, 29.5″, 32.5″ and 35.5″. Titan’s own listing rounds the range to 27″ to 35″.
How much weight can the Titan landmine stand hold?
Titan rates the stand and its nylon roller barbell rest for up to 440 pounds, which is well beyond what most people load on a landmine.
Is the Titan landmine stand with weight storage worth it?
If you train heavy on the top setting, it’s worth the roughly $50 extra. The two 8″ sleeves hold Olympic plates, and loading them steadies the stand and helps with the wobble we noticed on the standard model.
Does the stand come with a landmine attachment?
No. The stand only supports the loaded end of the bar, so you still need a landmine pivot on a rack or a freestanding base for the other end.





